最新澳门网址大全

  • 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 无尘净化车间中的废气处理步骤
    来源:最新澳门网址大全 浏览: 发布日期:2018-05-11
    无尘车间即洁净厂房,又叫洁净室,洁净室一般包括工业洁净室和生物洁净室,工业洁净室,特别是电子工业洁净室排放的废主要成份有:一般废气、热废气、有机废气、酸碱废气、含磷等特殊废气、含粉尘的废气等,不同行业、不同产品、其排放的废气的成份不同,但一定处理达到排放标准后方能排到室外。
    Clean rooms are clean rooms and clean rooms, and clean rooms generally include industrial clean rooms and biological clean rooms. Industrial clean rooms, especially the clean rooms in the electronic industry, are the main waste ingredients: general exhaust, hot gas, organic waste gas, acid and alkali waste gas, special waste gas containing phosphorus, and dust containing waste gas and so on. Different products and their exhaust emissions are different, but they must be treated to meet the national emission standards before they can be discharged to the outside.
    1、一般生活用房、值班室、卫生间排出的一般废气可直接排到室外。
    1, the general exhaust from ordinary living rooms, duty rooms and washrooms can be directly discharged to the outside.
    2、排放的有机废气超标时必须经过有机废气处理设备处理达标后再排放有机废气,处理方法有活性炭吸附法、液体吸收法等。
    2. When the emission of organic waste gas exceeds the standard, the organic waste gas treatment equipment must be treated after the treatment of the standard and then discharge the organic waste gas. The treatment methods include activated carbon adsorption and liquid absorption.
    3、如含酸碱废气在生产工艺中排放的较多,都是经过淋液湿式洗气吸收塔进行中和处理达标排放。
    3, if the acid and alkali waste gas is discharged more in the production process, it is treated through the leaching liquid wet washing gas absorption tower for neutralization and treatment to meet the standard discharge.
    4、排放的热废气一般情况下可直接排放,如果温度较高必须采取隔热措施以免伤人。
    4, the exhaust gas can be discharged directly under normal conditions. If the temperature is higher, heat insulation measures must be taken to avoid hurting people.
    5、含尘废气必须经过适当的除尘装置除尘后再排至大气中。
    5, dust exhaust must be removed after proper dust removal and then discharged into the atmosphere.
    6、含磷、含砷等特殊废气首先防止在排气系统中产生化学反应并通过专用的废气处理设备处理后达标排放。一般处理方法有稀释法、吸收法、吸附法、催化燃烧法等等。
    6, phosphorus, arsenic and other special exhaust gases are first prevented from producing chemical reactions in the exhaust system and discharged through standard exhaust treatment equipment. The general treatment methods include dilution method, absorption method, adsorption method, catalytic combustion method, etc.
    以上的介绍,您了解了吗?如果您有不明白的地方,欢迎您的致电,我们全面为您介绍,欢迎您的莅临参观哦。
    Do you know the above introduction? If you do not understand, please call us. We will introduce you to you. Welcome to visit us.
    XML 地图 | Sitemap 地图