最新澳门网址大全

  • 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 洁净室怎样达到洁净度要求
    来源:最新澳门网址大全 浏览: 发布日期:2017-09-25
    洁净室要获得良好的洁净效果,不仅要着重采取合理的空调净化措施,而且也要求工艺、建筑及其他采取相应的措施:不但要有合理的设计,而且还要精心的符合规范的施工安装,以及正确的使用洁净室和科学的维护管理。为使洁净室获得良好的效果,国内外已有不少文献从不同的角度作过阐述。
    Clean room clean to obtain good results, not only to take reasonable measures and requirements of air purification, technology, construction and other major measures: not only to have reasonable design, but also well meet the installation specifications of the construction and use of clean room, the correct and scientific maintenance management. In order to make the clean room get good results, many literatures have been expounded from different angles.

    实际上,不同之间很难做到理想地配合,而且设计者很难把握施工安装质量以及使用和管理情况,尤其后者。就洁净室净化措施而言,许多设计者,或者还有施工方,往往对其必要条件未予足够重视,造成洁净效果不理想。
    In fact, it is difficult to cooperate ideally among different majors, and it is difficult for designers to grasp the quality of construction and installation, as well as the use and management, especially the latter. As far as clean room measures are concerned, many designers, or construction workers, often fail to pay enough attention to the necessary conditions, resulting in an unsatisfactory cleaning effect.
    洁净室的气流组织与一般空调房间有所不同,它要求将干净的空气首先送到操作部位,它的作用在于限制和减少对加工物的污染。为此,在设计气流组织时应考虑这些原则:尽量减少涡流,避免将工作区以外的污染带入工作区;尽量防止灰尘的二次飞扬以减少灰尘对工件的污染机会;工作区的气流要尽量均匀,且其风速要满足工艺和卫生要求,当气流向回风口流动时要使空气中的灰尘能有效的带走。根据不同的洁净度要求,选择不同的送、回风方式。
    The air distribution in a clean room is different from that in a general air-conditioned room. It requires the most clean air to be sent to the operating area first. Its function is to limit and reduce the pollution to the processed products. Therefore, in the design of airflow organization should consider these principles: minimize eddy current, avoid working outside the area pollution into the work area; to prevent dust flying two times to reduce dust pollution on the chance of the workpiece; the work area to flow as uniform as possible, and the wind speed to meet the technical and health requirements, when the gas flow return air flow to make the dust in the air can be effectively removed. According to the different cleanliness requirements, choose different ways of air supply and return.
    您如果对我们的产品感兴趣或者有任何的疑问,您可以直接给我们留言或直接与我们联络,我们将在收到您的信息后,会时间及时与您联络。
    If you are interested in our products or have any questions, you can either leave us a message or contact us directly. We will contact you in the first time after receiving your information.
    XML 地图 | Sitemap 地图