Asepsis room has been applied in many industries, such as electronic information, semiconductor, optoelectronics, precision manufacturing, medical and health, bioengineering, aerospace, automotive spraying and many other industries. According to the industry's precision and dust-free requirements, the level difference is also large.
The asepsis room and the buffer room must be closed, and the ventilation equipment of the indoor equipment must have air filter. After the aseptic and aseptic materials are obtained, a specific known microorganism can be studied only by maintaining the aseptic state. Therefore, the ability to control bacteria and the stability of bacteria control are the core acceptance criteria in the asepsis room.
The decoration requirements of asepsis room purification engineering:
1, the studio should be small and smooth, the area only needs about 4 meters and 2, high 2.2-2.3 meters, interior decoration should be smooth, smooth, no bump or angle and so on.
2. The indoor lighting area is large, and the indoor situation should be seen from the outdoor.
3. To ensure the cleanliness of the asepsis room, a buffer corridor should be set around the asepsis room. The buffer room is set beside the corridor. The area can be less than that of the asepsis room.
4, asepsis room, buffer corridor and buffer room are equipped with fluorescent lamps and ultraviolet lamps for disinfection of air. The ultraviolet lamp is suitable for 1 meters away from the worktable, and the power switches should be located outside.
5, the entrance and exit of the asepsis room and the buffer room should be set up, the door and the window are flat, the door seam should be sealed, the two doors should be staggered, so as to avoid the air pollution caused by the pollution.
Do you know the above introduction? If you do not understand the place, welcome your call, we would like to introduce you in an all-round way, welcome to visit you.