最新澳门网址大全

  • 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 净化无尘车间的结构材料选择有哪些?
    来源:最新澳门网址大全 浏览: 发布日期:2020-11-03
    一、路面的材料
    1、 Pavement materials
    在路面的规定上,就一定要留意静电感应(是一种处在静止不动情况的电荷)难题,因此人们要用环氧树脂(Oxygen)自流平地坪漆或是是耐磨损耗性强的那类塑胶(构造:树脂材料、阻燃剂、增稠剂、染料)木地板,才可以做到抗静电的规定。
    In terms of road surface regulations, we must pay attention to the problem of electrostatic induction (which is a kind of static charge). Therefore, people should use epoxy resin (oxygen) self leveling flat paint or plastic (structure: resin material, flame retardant, thickener, dye) wood floor with strong wear resistance, so as to achieve the anti-static regulation.
    The first
    二、墙壁顶端的材料
    2、 Material at the top of the wall
    墙壁和顶端材料的规定是一样的,因此人们放进一起来看。这两一部分一般的规定是应用五十mm厚的夹心巧克力采厚钢板来建造的,那样的材料有许多优势,其一是能够具有优良的隔热保温实际效果,其二是美观大方安裝起來非常容易,其三就是说牢固。此外墙壁上安裝的对话框一般也规定选用空气氧化(oxidation)铝材料的工艺品来建造。
    The rules for the wall and the top material are the same, so people put it together. These two parts of the general provisions are to use 50 mm thick sandwich chocolate thick steel plate to build, such materials have many advantages, one is that it can have excellent thermal insulation effect, the other is beautiful, easy to install, and the third is firm. In addition, the dialog box installed on the wall is generally stipulated to be made of air oxidation aluminum materials.
    空气净化工程
     
    三、排风管路的材料
    3、 Material of exhaust pipe
    净化无尘车间是必须下设排风管路设备的,这一设备针对净化无尘车间来讲很关键,他一般规定用热浸镀锌(galvanization)(zinc)板(Zinc coated steel)来铺装,可是这还不算是进行,铺装完以后也要贴上阻燃性PF聚氨酯发泡塑料(关联事情:塑胶)板,目地是用以净化和隔热保温。
    It is necessary to set up exhaust pipeline equipment in the clean and dust-free workshop. This equipment is very important for the dust-free workshop. It is generally stipulated to use zinc coated plate After the pavement is finished, the flame retardant pf polyurethane foam plastic (related matter: plastic) board should be pasted for purification and heat insulation.
    The first
    四、送风口的材料
    4、 Material of air supply outlet
    送风口分成2个一部分,一部分是它的框架结构,一般要选用不锈钢板的色泽,它是以便其牢固水平和美观大方性;也有一部分是它的冲孔网板,要选用的是喷漆铝(Al)板,都是充分考虑牢固性。
    The air supply outlet is divided into two parts, one part is its frame structure. Generally, the color of stainless steel plate should be selected to ensure its firmness, level and beauty; the other part is its perforated mesh plate, which should be spray painted aluminum (AL) plate, and the firmness should be fully considered.
    有了空气净化工程上面的小总结,希望对广大客户有所帮助,如果有什么不理解的或者寻求帮助的请点击我们的网站:或者来电咨询,我们会尽全力为您解决
    With the summary of the air purification project, I hope it can help our customers. If you have any questions or ask for help, please click our website: Or call consultation, we will try our best to solve it for you
    XML 地图 | Sitemap 地图